24V Solar-COB-LED-Streifen, doppelseitig leuchtend, IP67 wasserdicht, Neonband, 320 LEDs, warmweißes, natürliches Licht, für Haus und Garten

Note -The light strip that just arrived is not lit. Generally, the solar panel does not have sufficient power and needs to be fully charged before use. If you don't know how to use it, please contact our customer service. There will be corresponding usage steps. -The light strip should be fully charged and lit in a place without direct sunlight. There are 2 styles for the link -Light strip style only: No solar panels, only light strip -Solar light strip style: solar panels and light strips Specifications： Type: 24V Solar Powered COB LED Strip Light Name:Double Side Glow COB LED Strip Light LED quantity: 320LEDs/meter PCB Size: Width:12mm Height:5mm Power: 1-13W/m(24V) Color rendering index CRI >90RA IP Rate: IP65/IP67 waterproof(casing waterproof), can be used outdoor Cutting Length: -about 5cm can be cut at marked position(DC24V) Lighting Angle: 120 ° ~ 140 ° Length: 0.5m / 1m / 2m / 3m / 4m / 5m / 6m / 7m / 8m / 9m / 10m(DC24V) Lighting Color: Warm White(3000-3500K), Natural White(4000-4500K), Cold White(6000-6500K) Power connection interface cord length: About 1.2 meter Operation temperature: -20℃-+45℃ Storage temperature: -20℃-+60℃ View angle: 180 0.5m-2m come with 1.3W controller 3m-5m come with 2.8W controller 6m-10m come with 6W controller IP65/IP67 waterproof light strips can be placed underwater , such as in fish tanks, swimming pools, etc. Package includes： Only Neon Strip 1X Double Side Glow COB LED Strip 1X Installation screws Solar Powered LED Neon Strip Light Kit 1X Double Side Glow COB LED Strip 1X Solar Panel 1X Installation screws 1X USB charging 1X Swivel Bracket Installation preparation ‌Site selection requirements 1. Choose a position where the sunlight is directly exposed during the day is ≥6 hours to ensure that the solar panels are not blocked by the sun. 2. The light strip can be hung from the wall, bracket or paved flat on the ground (some models support ground insertion)‌ ‌Component Connection 3. Connect the light strip to the solar panel through a waterproof interface to confirm that the buckle is completely locked‌ Models equipped with remote control must first be aligned with the front of the light strip and press any function keys to complete the pairing‌ Charging and startup ‌1. Charging method‌ ‌Solar Charging‌: Place the solar panels in the sun during the day to automatically charge (recommended daily charging)‌ ‌Emergency cable charging‌: Connect the charging cable through the USB interface to recharge the charge (applicable on rainy days)‌ ‌2. Turn on the light to trigger ‌ Press "ON" to Turn it on, press "OFF" to turn it off immediately 3.Power display light There is a power display, which makes it easier for you to charge solar panels in time 4.8 modes for switching the light strips in solar panels Conmbination In Waves Sepuential Slow Glow Chasing/Flash Slow fade Twinkle/Flash Steady On Maintenance and precautions ‌1. Daily maintenance‌ Regularly wipe the dust on the surface of solar panels with a soft cloth to maintain photoelectric conversion efficiency‌ It is recommended to reclaim indoor storage when it is below -10℃ in winter (except for lithium battery anti-freeze models) ‌2. Troubleshooting‌ Check whether the battery polarity is installed correctly when the light strip is not on (the positive electrode is facing the lamp head/the negative electrode is facing the tail)‌