Winterbeheizter Katzenbrunnen mit automatischer 3-Liter-Füllung, großem Zirkulationsfilter, 3600-mAh-Akku, leisem Thermostat und Haustier-Wasserspender

Currently, only Chinese plugs are in stock. Power adapter input voltage: AC100-240V~50-60Hz Output voltage: DC 12V 3A Buyers only need to prepare a plug adapter to use it. Product Dimensions: 233*197*154mm Constant Temperature: 28~30℃ Silent Water Pump: 30dB Dry-burning protection in case of water shortage 3L large capacity, constant flow water output, no splashing when full, no dripping when low. Wireless design: Built-in 3600mAh high-capacity rechargeable battery, works without a cable. Wide-angle radar sensor, sensing distance up to 1 meter. Three working modes: 1. Sensor-activated water dispensing 2. Timed water dispensing 3. Continuous water dispensing when plugged in Food-grade materials, multi-stage filtration, effectively removes impurities, protecting your pet's health. Precautions 1. Before use, rinse the filter cartridge with clean water and soak it for two minutes to remove any floating carbon caused by collisions during transportation. 2. It is recommended to replace the filter cartridge and water pump sponge monthly (the specific replacement time may vary depending on the usage environment). Regularly check and clean the water tank and water pump to prevent foreign matter buildup that could clog the pump, causing poor water flow and bacterial growth. 3. When adding water to the water dispenser, ensure the water level is between the maximum and minimum mark. 4. The water dispenser base contains electronic components; do not immerse or rinse the base directly during cleaning. 5. Do not use water exceeding 40 degrees Celsius to clean the machine, as this may deform parts and affect the dispenser's operation. 6. Do not use an adapter with a voltage exceeding the product's input voltage.